Installing the safety partition wall (rear shelf)
Prerequisite
Rear seat backrests are folded.
NOTE:
TECHNICAL INFORMATION
Conduct the following operation with the assistance of a second person.
Conduct the following operation with the assistance of a second person.
- Guide in the safety partition wall (rear shelf) from the luggage compartment to the top and position it correctly.
- Before screwing, apply a drop of screw locking agent on the thread of each screw (1).
ADHESIVE SPECIFICATIONS
| Screw lock Loctite Stick 243, medium strength | 10 ml, Bottle | 83192210339 |
- Screw in screws (1) from the luggage compartment with a few turns.
- Before screwing, apply a drop of screw locking agent on the thread of each screw.
ADHESIVE SPECIFICATIONS
| Screw lock Loctite Stick 243, medium strength | 10 ml, Bottle | 83192210339 |
- Tighten the screws (arrows) from the vehicle interior.
TIGHTENING TORQUE SPECIFICATIONS
| Safety partition wall (rear shelf) to the safety partition wall at the center | ||
|---|---|---|
| Flat-head screw M8x22 | tightening torque | 20 Nm |
- Tighten screws (1) from the luggage compartment.
TIGHTENING TORQUE SPECIFICATIONS
| Safety partition wall (rear shelf) to the safety partition wall above | ||
|---|---|---|
| Flat-head screw M8x22 | tightening torque | 35 Nm |