Installing the drive for the inner backrest width adjustment

• Thread in drive (2).
• Connect plug (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Slightly fold backrest cover (1) to one side.
• Secure drive with blind rivets (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Attach the backrest cover (2) in this area (3).
• Secure the clip (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Attach the backrest cover (1) in the signaled area.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING INNER COVER ON FRONT SEAT .
• Refer to INSTALLING THE BOTTOM REAR PANEL ON THE FRONT SEAT REAR PANEL .
• Refer to INSTALLING THE TOP REAR PANEL ON THE FRONT SEAT REAR PANEL .
• Refer to INSTALLING FRONT SEAT .