Installing the drive for the seat angle adjustment

Prerequisite

The front seat is adjusted all the way up.

• Position the drive for the seat angle adjustment (4) correctly.
• Tighten the nuts (1) and bolts (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Drive for seat cushion tilt adjustment to seat
  Nut M6	Tightening torque	14 Nm
  Stud	Tightening torque	8 Nm

• Connect connector (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE FRONT TRIM OF THE FRONT SEAT .
• Refer to INSTALLING OUTER COVER ON FRONT SEAT .
• Refer to INITIALIZING THE ELECTRICAL SEAT ADJUSTMENT DRIVES .