Removing the model inscription
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
- To avoid paint damage: Mask off the component in the working area with plastic adhesive tape.
- Carefully heat the model inscription (1) with a hot air blower and release it from the adhesive tape with the special tool 0 490 539 (00 9 322) .
TECHNICAL DATA SPECIFICATIONS
| Heating using hot air blower | |
|---|---|
| Surface temperature | 40°C... 50°C |
- Remove adhesive residue from the trunk lid.