Installing the sliding block of cylinder bank 2

• Remove the oil and dirt from the sliding block (3).
• Position the sliding block (3) and abut with the screw (1).
• Position the special tool 2 249 166  on the intake camshaft (1) in the sliding block (2) area.
• Preload the sliding block (3) with the special tool 2 249 166  (2) in direction of arrow.
• Tighten down screw (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Sliding block on cylinder head
  Screw M7x35 10.9	Tightening torque	20.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Relieve the special tool 2 249 166  (1) and feed it out of the camshaft (2) and place aside.
• Repeat the step for all the gates.

Courtesy of BMW OF NORTH AMERICA, INC.