Install left heat shield

• Feed in left heat shield (2) and connect to the other heat shields.
• Tighten the screw (1) at the top of heat shield (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Heat protection plate
  M6x16	tightening torque	10 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect the heat shield (2) with the heat shield below.
• Tighten the screw (1) at the bottom of heat shield (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Heat protection plate
  M6x16	tightening torque	10 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the holder of the pressure lines.

Tighten screws in areas (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in left heat shield (2) and connect to the other heat shields.
• Tighten the screw (1) at the top of heat shield (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Heat protection plate
  M6x16	tightening torque	10 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect the heat shield (2) with the heat shield below.
• Tighten the screw (1) at the bottom of heat shield (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Heat protection plate
  M6x16	tightening torque	10 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Version with S1DFA: 

Position the holder of the pressure lines.

Tighten screws in areas (1).

Courtesy of BMW OF NORTH AMERICA, INC.