Detaching coolant hoses from the front axle support

• Remove the coolant line (1) from the holder (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: The following step(s) must be performed if the listed component(s) is/are installed.
• Loosen the coolant hose (1) from its holders (2).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: The following step(s) must be performed if the listed component(s) is/are installed.

• If installed: Remove the coolant line (1) from the holder (2).

Courtesy of BMW OF NORTH AMERICA, INC.