Install upper cross connection

WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.

Feed in cross connection (2).
Attach the Bowden cable.

Tighten down screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Front cross connection
screw
	Tightening torque	19 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE COVER IN THE ENGINE COMPARTMENT AT TOP LEFT AND RIGHT .