Removing upper oil sump section, engine removed

WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.

Screw connection of upper oil sump section

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connection (1) and disconnect.
Unlock plug connection (2) and disconnect.
Release, feed out and remove the oil pressure sensor (3).
Loosen the clamp (arrow).

Courtesy of BMW OF NORTH AMERICA, INC.

Release the cable (1) from the clamp (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Loosen screw (25) to (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Loosen screws (1) and (2).
With the assistance of another person guide out the upper oil sump section (3) and remove it.

Courtesy of BMW OF NORTH AMERICA, INC.