Detach the top left and right wishbone from the swivel bearing

WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Perform the steps on the right and left side.

Detach the upper wishbone from the swivel bearing

Unfasten nut (1) .
(2) Pull out screw.
Detach upper wishbone (3) from swivel bearing (4) .

Courtesy of BMW OF NORTH AMERICA, INC.