Install the connecting supports on the tunnel

WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.

Position the connecting support (2) on the tunnel.
Replace screws (1) .
Parts: Screws

Tighten down screws (1) .

TIGHTENING TORQUE SPECIFICATIONS

Connecting support on tunnel to body
Hexagon screw M 10x25 Replace screws
	Joining torque Angle of rotation	56 Nm 90°

Courtesy of BMW OF NORTH AMERICA, INC.