Installing oil filler neck

• Replace the sealing ring (2) on the oil filler neck (1).

  Parts:  Sealing ring

• Coat the sealing ring (2) with the recommended engine oil.
  ENGINE OIL SPECIFICATION
  
  

  Technically suitable engine oils for BMW Group engines

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position oil filler neck (1).
• Turn oil filler neck (1) about 15° counterclockwise.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten screw (2) on the oil filler neck (3).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Oil filler neck
  M6x16	tightening torque	10 Nm

• Tighten screw (1) on the oil filler neck (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING RIGHT CLEAN AIR PIPE .
• Refer to PARTIALLY INSTALLING THE RIGHT ENGINE VENTILATION LINE .
• Refer to CONNECTING THE RIGHT CHARGE AIR LINE TO THE EXHAUST TURBOCHARGER .
• Refer to INSTALLING THE CARRIER PLATE .
• Refer to INSTALLING THE RIGHT UNFILTERED-AIR DUCT .
• Refer to INSTALLING COVER FOR THE RIGHT DME CONTROL UNIT .
• Refer to INSTALLING THE TENSION STRUT ON THE RIGHT SHOCK TOWER .
• Refer to INSTALLING LEFT INTAKE SILENCER HOUSING .
• Refer to INSTALLING THE RIGHT INTAKE SILENCER HOUSING .
• Refer to INSTALLING ACOUSTIC COVER .