Engine - Coolant Thermostat & Lines/Intake System/Turbocharger - Repair - X5 (G05)

• 11 53 Thermostat And Engine-Mounted Coolant Lines
  • 11 53 095 Removing/installing/replacing coolant return line for left exhaust turbocharger (X5 M50i, 2020-)
    • Removing the coolant return line for the left-hand exhaust turbocharger
    • Installing the coolant return line for the exhaust turbocharger
  • 11 53 096 Removing/installing/replacing coolant supply line for right exhaust turbocharger (X5 M50i, 2020-)
    • Removing the coolant feed line for the right-hand exhaust turbocharger
    • Installing the coolant feed line for the right exhaust turbocharger
  • 11 53 098 Removing and installing/replacing the right coolant return line for the exhaust turbocharger (X5 M50i, 2020-)
    • Remove the coolant return line for the right exhaust turbocharger
    • Installing the coolant return line for the right-hand exhaust turbocharger
  • 11 53 015 Removing and installing/replacing heat management module (X5 xDrive 45e, 2021-)
    • Remove heat management module
    • Install heat management module
  • 11 53 082 Removing and installing/replacing the coolant feed line for the exhaust turbocharger (X5 xDrive 45e, 2021-)
    • Remove the coolant feed line for the exhaust gas turbocharger
    • Installing coolant feed line for exhaust turbocharger
  • 11 53 086 Removing and installing/replacing the coolant return line for the exhaust turbocharger (X5 xDrive 45e, 2021-)
    • Remove the coolant return line for the exhaust turbocharger
    • Install the coolant return line for the exhaust turbocharger
  • 11 53 116 Removing and installing/replacing coolant line for cylinder head coolant pump (X5 xDrive 45e, 2021-)
    • Remove the coolant line between the coolant pump and cylinder head
    • Installing the coolant line between the cylinder head and the coolant pump
• 11 61 Intake System
  • 11 61 050 Removing and installing the intake plenum (X5 xDrive 40i, 2019-, X5 sDrive 40i, 2020-)
    • Removing the intake plenum
    • Installing the intake plenum
  • 11 61 050 Removing and installing the intake plenum (X5 xDrive 40i 48V 2019-, X5 sDrive 40i 48V 2020-)
    • Removing the intake plenum
    • Installing the intake plenum
  • 11 61 051 Replace intake plenum (X5 xDrive 40i, 2019-, X5 sDrive 40i, 2020-)
    • Removing the intake plenum
    • Replace intake plenum
    • Installing the intake plenum
  • 11 61 051 Replace intake plenum (X5 xDrive 40i 48V 2019-, X5 sDrive 40i 48V 2020-)
    • Removing the intake plenum
    • Replace intake plenum
    • Installing the intake plenum
  • 11 61 730 Leakage test for the intake system (X5 xDrive 40i, 2019-, X5 sDrive 40i, 2020-, X5 xDrive 45e, 2021-)
    • Preparing the diagnostic system
    • Check air intake system for tightness
  • 11 61 050 Removing and installing the intake plenum (X5 xDrive 45e, 2021-)
    • Removing the intake plenum
    • Install intake plenum
  • 11 61 051 Replace intake plenum (X5 xDrive 45e, 2021-)
    • Removing the intake plenum
    • Replace intake plenum
    • Install intake plenum
• 11 65 Charger With Control
  • 11 65 020 Removing and installing/replacing exhaust turbocharger (X5 xDrive 40i, 2019-, X5 sDrive 40i, 2020-)
    • Remove exhaust turbocharger
    • When replacing the exhaust turbocharger: Dismount the oil coolant lines
    • Prepare for the installation of the exhaust turbocharger
    • Installing exhaust turbocharger
  • 11 65 803 Replace electrical controller drive for wastegate (after vehicle diagnosis) (cylinders 1-4, if necessary cylinders 1-6) (X5 xDrive 40i, 2019-, X5 sDrive 40i, 2020-)
    • Remove the electric wastegate valve actuator
    • Install electric wastegate valve actuator
    • For electrical wastegate valve controller: teaching in and checking end stops with the diagnostic system (after vehicle diagnosis)
  • 11 65 025 Removing and installing/replacing the right exhaust turbocharger (X5 xDrive 50i, 2019)
    • Remove the exhaust turbocharger for the cylinders 1 to 4
    • When replacing the right exhaust turbocharger: Remount components
    • Installing the exhaust turbocharger for the cylinders 1 to 4