When replacing the right exhaust turbocharger: Remount components

Unscrew the banjo bolt (1).
Loosen screw (2).
Remove the coolant pipe.

Courtesy of BMW OF NORTH AMERICA, INC.
Unscrew the banjo bolt (1).
Loosen screw (2).
Remove the coolant pipe (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Replace the banjo bolt.
Parts: Hollow bolt
Replace seals (1).
Parts: Seals

Courtesy of BMW OF NORTH AMERICA, INC.
Replace the right exhaust turbocharger.
Parts: Right exhaust turbocharger
Position the coolant pipe (3).
Position the banjo bolt (1) and screw in several threads.
Hand-tighten the bolt (2).
Tighten the banjo bolt (1).

G14256210

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUE SPECIFICATIONS

Banjo bolt for coolant pipe to exhaust turbocharger
Hollow bolt Replace the banjo bolt.	Joining torque	8 Nm
	Angle of rotation	60°

Tighten down screw (2).

TIGHTENING TORQUE SPECIFICATIONS

Coolant line to exhaust turbocharger
M6x16	tightening torque	10 Nm

Replace the banjo bolt.
Parts: Hollow bolt
Replace seals (1).
Parts: Seals

Courtesy of BMW OF NORTH AMERICA, INC.
Position the coolant pipe.
Position the banjo bolt (1) and screw in several threads.
Hand-tighten the bolt (2).
Tighten the banjo bolt (1).

TIGHTENING TORQUE SPECIFICATIONS

Banjo bolt for coolant pipe to exhaust turbocharger
Hollow bolt Replace the banjo bolt.	Joining torque	8 Nm
	Angle of rotation	60°

G14256209

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screw (2).

TIGHTENING TORQUE SPECIFICATIONS

Coolant line to exhaust turbocharger
M6x16	tightening torque	10 Nm