Installing the wiper console

• Connect connectors (2) and lock.
• Clip in the cable bracket (3).
• Insert the wiper console (5) into the guide (4).
• Replace nut (1).

  Parts:  Nut

• Tighten nut (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Wiper console to body
  Nut M8 Replace nut.	tightening torque	11.8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert and lock the water drain channel (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING WINDSHIELD PANEL COVER .
• Refer to INSTALL LEFT AND RIGHT WIPER ARM .
• Refer to INSTALLING THE REAR RIGHT ENGINE COMPARTMENT COVER .
• Refer to INSTALLING THE COVER OF THE ENGINE COMPARTMENT ON THE REAR LEFT .