Replacing trim panels on the operating facility in the center console

Removing trim panels on the operating facility in the center console 

• Press trim for the parking brake button (1) in the arrow direction, forward and downward.
  NOTE: The trim of the parking brake button releases by forcefully pressing it out of the detents.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Lever out the trim (2) with the special tool 0 493 681 (64 1 020).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Lever out the trim (1) with the special tool 0 493 681 (64 1 020).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Lever out the trim (1) with special tool 0 493 681 (64 1 020) at the marked positions.

Courtesy of BMW OF NORTH AMERICA, INC.

Installing the trims on the operating facility in the center console 

• Position trim (1) on the operating facility in the center console (2) and engage.

  All snap-in lugs must engage audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position trim (1) and clip in.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position trim (1) on the operating facility in the center console (2) and engage it.

  All snap-in lugs must engage audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the trim (1) for the parking brake button and lock in place in the arrow direction.

  The trim of the parking brake button (1) must lock audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE SELECTOR LEVER .
• Refer to INSTALLING HDC BUTTON .
• Refer to INSTALL CONTROLLER .
• Refer to INSTALLING THE OPERATING FACILITY IN THE CENTER CONSOLE .
• Refer to INSTALLING THE BRACKET ON THE CENTER CONSOLE TRIM .
• Refer to INSTALLING THE CENTER CONSOLE TRIM .
• Refer to INSTALLING THE CARPET ON THE CENTER CONSOLE AT LEFT AND RIGHT SIDES .
• Refer to CONNECTING ALL BATTERY GROUND LEADS .
• Refer to ENCODING/PROGRAMING CONTROL UNIT(S) .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .