Install controller

• Position controller (2) on the gear selector switch (GWS) (3) and engage in the detents (arrows).
• Tighten down screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE BRACKET ON THE CENTER CONSOLE TRIM .
• Refer to INSTALLING THE CENTER CONSOLE TRIM .
• Refer to INSTALLING THE CARPET ON THE CENTER CONSOLE AT LEFT AND RIGHT SIDES .
• Refer to CONNECTING ALL BATTERY GROUND LEADS .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .