Installing rear door window glass (fixed)
- Insert the door window glass (2) in the door.
- Insert the door window glass (2) on top in the door.
- Tighten down screw (1).
TIGHTENING TORQUE SPECIFICATIONS
| Door window glass to door window frame | ||
|---|---|---|
| Screw 4.2x19 | Tightening torque | 2.5 Nm |
- Tighten down screw (1).
TIGHTENING TORQUE SPECIFICATIONS
| Door window glass to inner door panel | ||
|---|---|---|
| screw | Tightening torque | 7.6 Nm |
- Insert the window guide rail (2) in the door.
- Tighten the screws (1).
TIGHTENING TORQUE SPECIFICATIONS
| Window guide rail | ||
|---|---|---|
| screw | Tightening torque | 2. Nm |
- Mount the rubber window seal (1) in the window guide rail (2).
Follow-up work