Removing the front emblem
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp edged components .
Scratches, surface damage .
Careless handling of tools and sharp edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
- Mask off the working area with plastic adhesive tape to prevent paintwork damage.
- Heat the emblem (1) carefully with a hot air blower and release it from the adhesive strip with the special tool 0 496 571 (00 9 327) .
TECHNICAL DATA SPECIFICATIONS
| Heating using hot air blower | |
|---|---|
| Surface temperature | 40°C... 50°C |
- Lever out the emblem (1) carefully from the grommets (2) and remove.
Emblem (1) must be replaced after removal.