Removing The Lower Section Of Tailgate
Preliminary work
- Refer to REMOVE BATTERY COVER .
- Refer to REMOVING THE LOADING EDGE TRIM .
- Refer to REMOVING TRUNK LID LOCK SWITCH AT BOTTOM .
- Refer to REMOVE BOTTOM TAILGATE TRIM PANEL .
- Unlock and disconnect plug connections (1).
- Release the rubber grommet (2) from the trunk lid.
- Release the wiring harness at the marked locations (arrows) and feed out of trunk lid.
- Secure the lower section of tailgate from falling down.NOTE: Perform the steps on the left and right side.
- Release screw (1) and set the support (2) aside.NOTE: RISK OF DAMAGE
Mechanical effects.
Paint damage.- Mask those working areas at risk with yellow plastic adhesive tape.
- Remove and install heavy or bulky components with the aid of another person/other persons.
- Release the screws (1) and remove the lower section of tailgate.