Install The Outer Section Of The A-Pillar
Further information is available.
NOTE:
TECHNICAL INFORMATION
Use only approved spot welder for repair.
For additional information see 4100... WORKSHOP EQUIPMENT (BMW AND MINI VEHICLES) (ALL X5 MODELS, 2019-2022) .
Use only approved spot welder for repair.
For additional information see 4100... WORKSHOP EQUIPMENT (BMW AND MINI VEHICLES) (ALL X5 MODELS, 2019-2022) .
- Pre-clean the bonding surfaces (1) on the new part and on the vehicle with cleaning agent R2.CONSUMABLE SPECIFICATIONS
Cleaning agent R2 500 ml 83190417324 - (1) Clean bonding surfaces on vehicle and on new part with cleaning agent R1.CONSUMABLE SPECIFICATIONS
Cleaning agent R1 100 ml, Bottle 83192211217 NOTE: TECHNICAL INFORMATION
For additional information see 4100... INSTALLING CAVITY SEALING (EXPANDED) (ALL X5 MODELS, 2019-2022) . - Apply sealant D1 to the cavity sealings (2).CONSUMABLE SPECIFICATIONS
Sealant D1 (seam sealing) 310 ml 83422409985 - Apply adhesive K5 to bonding surface (1).ADHESIVE SPECIFICATIONS
Body adhesive K5 50 ml 83192158654 - Install and fasten new part together with the reinforcement plate.
- Rivet the new part in area (1) with blind rivets N3.CONSUMABLE SPECIFICATIONS
Blind rivet N3 83190301421 Ø 4 mm; clamping area 1-3 mm - Weld the new part and reinforcement plates in areas (1) and (2) as per new part preparation processes.
Follow-up work