Install Outer Wheel Arch Section With Reinforcement

Further information is available.

NOTE: TECHNICAL INFORMATION
Use only approved spot welder for repair.
For additional information see 4100... WORKSHOP EQUIPMENT (BMW AND MINI VEHICLES) (ALL X5 MODELS, 2019-2022) .

Install the new outer wheel arch section part in areas (1) and (2) and weld it according to the new part preparation process.

Courtesy of BMW OF NORTH AMERICA, INC.
Weld the new part in the areas (1) and (2) according to the new part preparation process.

Courtesy of BMW OF NORTH AMERICA, INC.
Weld the new part in the areas (1) and (2). In this process, avoid excessively high heat input in the adjacent adhesive area (arrows).

Courtesy of BMW OF NORTH AMERICA, INC.
Weld the new part in the area (1). Avoid applying too much heat to the adjacent adhesive area (2).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: TECHNICAL INFORMATION
For additional information see 4100... INSTALLING CAVITY SEALING (NOT EXPANDED) (ALL X5 MODELS, 2019-2022) .
Apply sealant D1 to the inner cavity sealing (1). Install the inner cavity sealing (1) on the new part.
CONSUMABLE SPECIFICATIONS

Sealant D1 (seam sealing) 310 ml 83422409985

Courtesy of BMW OF NORTH AMERICA, INC.
Apply sealant D1 to the inner cavity sealing (1) on the new part.
CONSUMABLE SPECIFICATIONS

Sealant D1 (seam sealing) 310 ml 83422409985
Install new part and weld in the areas (2).
Apply sealant D1 to the outer cavity sealing (3).
Install outer cavity sealing element (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work