Installing The Left Luggage Compartment Floor

• Join the new parts and weld in the area (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Adjust new parts to fit and secure.
• Weld the new parts in the area (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Weld new part in the area (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Weld the new parts in the areas (1) and (2) according to the new part preparation process.

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: To provide a better overview: Shown without side panel.
• Weld new part in the area (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to ACTIVATE HIGH-VOLTAGE SYSTEM .
• Refer to INSTALL FLAP IN RIGHT LUGGAGE COMPARTMENT TRIM PANEL .