Install A-pillar trim panel
WARNING:
Pyrotechnic components
.
Danger! Immobilization period-threatening injuries!
Danger! Immobilization period-threatening injuries!
- All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.
- Replace any damaged part or ones that have been dropped.
- For additional information see: SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .
- Insert the A-pillar trim panels (2) and clip into the clips (3).
- Tighten down screw.
TIGHTENING TORQUE SPECIFICATIONS
| Body pillar trim | ||
|---|---|---|
| Screw 4.8x38 | Tightening torque | 3.0 Nm |
- Clip in the cover (1).
WARNING:
Pyrotechnic components
.
Danger! Immobilization period-threatening injuries!
Danger! Immobilization period-threatening injuries!
- All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.
- Replace any damaged part or ones that have been dropped.
- For additional information see: SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .
- Insert the A-pillar trim panels (2) and clip into the clips (3).
- Before the completing the screw connection, add a drop of screw locking agent on the screw thread of the mounting bolt.
ADHESIVE SPECIFICATIONS
| Screw lock Loctite Stick 243, medium strength | 10 ml, Bottle | 83192210339 |
- Tighten down screw.
TIGHTENING TORQUE SPECIFICATIONS
| Body pillar trim | ||
|---|---|---|
| M5x30 screw | tightening torque | 2.5 Nm |
- Clip in the cover (1).