Removing the auxiliary turn signal lamp on the outside rearview mirror
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING MIRROR GLASS .
- Refer to REMOVING THE COVER CAP OF THE EXTERIOR MIRROR .
- Refer to REMOVING THE EXTERIOR MIRROR ADJUSTMENT DRIVE .
- Refer to REMOVING RETAINING RING FROM OUTSIDE REARVIEW MIRROR .
- Loosen screws (1).
- Feed out the lower housing section (2).
- Unlock plug connection (1) and disconnect.
- Loosen screws (2).
- Remove the top view camera (3).
- Unlock plug connection (1) and disconnect.
- Remove lower housing section with the auxiliary turn signal lamp.
- Loosen screw (1).
- Remove auxiliary turn signal lamp (2) from the lower housing section (3).