Installing the rubber mount on the rear active stabilizer

• Position the rubber mount (1) on active anti-roll bar (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Coat the outside of the rubber mount (2) with lubricant.
  CONSUMABLE SPECIFICATIONS
  
  

  Installation aid  (Circo Light; lubricant)

  250 ml, Bottle

  83192405829

• Slide retainer (1) onto rubber mount (2).
• It is essential to use the correct retainer for the respective side  .

  Depending on the equipment version, the retainers (1) are marked with an R (= right) or L (= left).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to SECURING THE REAR ACTIVE STABILIZER .