Install air conditioning compressor (engine removed)

• Position the air conditioning compressor (5).
• Position the spacer sleeve (3).
• Position the lug (4).
• Tighten down screws (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Air conditioning compressor to holder/engine
  M8	tightening torque	22 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect plug connection (1) and lock.
• Replace the seals (1) of the suction and pressure line.

  Parts:  Seals

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the intake pipe (3).
• Position the pressure line (2).
• Tighten down screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Refrigerant line on air conditioning compressor
M8	tightening torque	19 Nm

Courtesy of BMW OF NORTH AMERICA, INC.