Partially fastening the protective plate to the roof
- Put a drop of screw locking agent on the thread of each screw before screwing.
ADHESIVE SPECIFICATIONS
| Screw lock Loctite Stick 243, medium strength | 10 ml, Bottle | 83192210339 |
NOTE:
Perform the steps on the right and left side.
- Install holder (3).
- Tighten the screws (1).
TIGHTENING TORQUE SPECIFICATIONS
| Holder to roof | ||
| Screw M6x16 | tightening torque | 10 Nm |
- Tighten the screws (2).
TIGHTENING TORQUE SPECIFICATIONS
| Protective plate of the roof to the holder | ||
| Hexagon screw M8x25 | tightening torque | 35 Nm |
| Hexagon screw M10x30 | tightening torque | 70 Nm |
- Put a drop of screw locking agent on the thread of each screw before screwing.
ADHESIVE SPECIFICATIONS
| Screw lock Loctite Stick 243, medium strength | 10 ml, Bottle | 83192210339 |
- Tighten all the screws of the protective plate (1) in the area of the dotted line.
TIGHTENING TORQUE SPECIFICATIONS
| Protective plate of the roof to the holder | ||
| Hexagon screw M8x25 | tightening torque | 35 Nm |
| Hexagon screw M10x30 | tightening torque | 70 Nm |
NOTE:
Perform the steps on the right and left side.
- Tighten the screws (1) on the head airbag.
TIGHTENING TORQUE SPECIFICATIONS
| Head airbag to bodyshell | ||
| screw | Tightening torque | 8 Nm |