Installing the supports for the exhaust covers left and right

NOTE: Description is for left component only. Procedure on the right side is identical.

• Install the bracket (2) together with the exhaust cover.
• Tighten the screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Exhaust cover holder to bumper panel
Screw	tightening torque	3 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

• Mount blind rivet (2) using the special tool 0 496 521 (00 2 230) .
• Tighten down screw (1).

TIGHTENING TORQUE SPECIFICATIONS

Exhaust cover holder to bumper panel
Screw	tightening torque	3 Nm

Courtesy of BMW OF NORTH AMERICA, INC.