Installing the center safety partition wall
Prerequisite
Rear seat backrests are folded.
CAUTION:
Heavy component
.
Heavy components can lead to injury or damage .
Heavy components can lead to injury or damage .
- Remove and install heavy components with the aid of another person/other persons.
NOTE:
TECHNICAL INFORMATION
Conduct the following operation with the assistance of a second person.
Conduct the following operation with the assistance of a second person.
- Install the safety partition wall (5) and position it correctly.
- Apply a drop of screw locking agent to the threads of each screw and nut before screwing.
ADHESIVE SPECIFICATIONS
| Screw lock Loctite Stick 243, medium strength | 10 ml, Bottle | 83192210339 |
- Tighten the screws (4).
TIGHTENING TORQUE SPECIFICATIONS
| Safety partition wall at the center to the holder | ||
| Hexagon screw M8x25 | tightening torque | 35 Nm |
- Tighten the screws (3).
TIGHTENING TORQUE SPECIFICATIONS
| Safety partition wall at the center to the safety partition below | ||
| Hexagon screw M8x30 | tightening torque | 35 Nm |
| Nut M8 | tightening torque | 10 Nm |
- Tighten nuts (2).
TIGHTENING TORQUE SPECIFICATIONS
| Safety partition wall at the center to the safety partition below | ||
| Hexagon screw M8x30 | tightening torque | 35 Nm |
| Nut M8 | tightening torque | 10 Nm |
- Fit the holder and tighten the nut (1).
TIGHTENING TORQUE SPECIFICATIONS
| Holder for tailgate release to the safety partition wall at the center | ||
| Nut M6 | tightening torque | 5.0 Nm |
- Tighten screws (arrows).
TIGHTENING TORQUE SPECIFICATIONS
| Safety partition wall (rear shelf) to the safety partition wall at the center | ||
| Flat-head screw M8x22 | tightening torque | 20 Nm |