Removing all grab handles
NOTE:
The description is for one component only. The procedure is identical for all further components.
Removing the grab handle
- Expand the grab handle (1) towards the bottom.
- Disengage and remove the locking insert (2) with an angle screwdriver (3) in the arrow direction as shown.
- Pull the grab handle (2) slightly to the inside and hold it.
- Release the top and bottom release tab (1) with a suitable screwdriver (3) in the arrow direction.
- Feed out the grab handle (2) in the arrow direction.
- Repeat the operation on the other side of the grab handle (2).