If installed: Removing the third-row seating
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
Remove battery cover
- Fold up the luggage compartment floor covering (1).
- Release the expanding rivets (arrows) and remove the battery cover (2).
Removing the loading edge trim
- Loosen screws (1).
- Guide out and dismantle loading edge trim (2).
Removing the left luggage compartment wheel arch trim panel (with 3rd row of seats)
- Use the special tool 2 298 505
to lever out the covers (1) toward the top and feed out.
- Unscrew the screw (1) and remove the strap fitting.
- Loosen screw (1).
- Remove the cover (2) and release the screw below that.
- Release the luggage compartment wheel arch trim panel (3) upwards on the clips (4).
- Unlock plug connection (1) and disconnect.
- Feed out and remove the luggage compartment wheel arch trim panel (2) toward the rear at the trunk lid lock.
Removing the 3rd seat row
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
NOTE:
Perform the steps on the right and left side.
- Loosen screws (1).
- Remove the cover (2) of the side member.
- Remove the seat rail covers (1) in arrow direction.
- Loosen screws (1).
- Unlock and disconnect plug connections (1).
NOTE:
The plug connections are located on the right-hand underside of the third-row seating and can be reached via the cargo area floor covering.
NOTE:
RISK OF DAMAGE
Heavy component .
Heavy components can lead to injury or damage .
Heavy component .
Heavy components can lead to injury or damage .
- Remove and install heavy components with the aid of another person/other persons.
- Remove the third-row seating (2) with the help of a support person.
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Unscrew the bolts (1) and the nut (2).
- Remove holder (3).
- Lift the luggage compartment floor trim (4).