Installing oil feed line on turbocharger cylinders 5 to 8
WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the O-ring (1)
from the oil feed line (2)
.
- Replace O-ring (1)
.
Parts:
O-ring
 Courtesy of BMW OF NORTH AMERICA, INC.
|
- Feed in and position the oil feed line (2)
on the right of the crankcase.
- Tighten down screw (1)
.
TIGHTENING TORQUES SPECIFICATION
| Engine oil line to crankcase |
| M6 |
tightening torque |
10 Nm |
 Courtesy of BMW OF NORTH AMERICA, INC.
|