Remove the test gauges for securing the camshafts
WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.
- Remove screws (arrows).
- Thread out the test gage (1) from the set of special tools 2 358 122 between the intake camshaft and the basic carrier of the set of special tools 2 456 372 and remove.
- Thread out the test gauge (2) from the set of special tools 2 358 122 between the exhaust camshaft and the basic carrier of the set of special tools 2 456 372 and remove.