Installing acoustic cover

WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: RISK OF DAMAGE
Damage to the acoustic cover/design cover .
Jerky movements during disassembly and application of excessive force during installation may result in breakage of the acoustic cover/design cover .

Disassemble or mount the acoustic cover/design cover carefully.
Disassemble or mount snap-lock couplings of the ball pivots one after the other.
Disassemble or mount the acoustic cover/design cover only at temperatures > 20°C.
Use only distilled water as an auxiliary material during installation, no lubricants.

Check locking pin (1) for damage, replace acoustic cover if necessary.
Check acoustic cover for correct seating of the rubber mount (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Check rubber mount (1) for correct fit.
Check locking pin (2) for damage, replace if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.
Clip the acoustic cover (1) in the holder.

Courtesy of BMW OF NORTH AMERICA, INC.