LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2021
>>
X5 M50i
>>
Repair and Diagnosis
>>
External Pages
>>
Different car
>>
Section 256 (Body Equipment -- Repair (2 Of 2) (G07))
>>
51 47 Floor / Trunk / Engine Compartment Trim Panels
>>
51 47 491 Removing refitting/replacing rear engine undercover (X7 2019-2022)
>>
Installing underbody protection at rear
Installing underbody protection at rear
WARNING:
This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.
Insert underbody protection (1) and position correctly.
Tighten screws (arrows).
TIGHTENING TORQUE SPECIFICATIONS
Undershield/frame
Hexagon screw
tightening torque
3 Nm
Courtesy of BMW OF NORTH AMERICA, INC.