Engine - Cylinder Head/Valve Cover - Repair - X5 (G05) (1 Of 4)
- 11 12 Cylinder Head With Lid
- 11 12 101 Replace cylinder head gasket (X5 xDrive 40i, 2019-, X5 sDrive 40i, 2020-)
- 11 12 161 replace cylinder head (X5 xDrive 40i, 2019-, X5 sDrive 40i, 2020-)
- 11 12 161 replace cylinder head (X5 xDrive 40i 48V 2019-, X5 sDrive 40i 48V 2020-)
- 11 12 502 Disassemble and assemble cylinder head (X5 xDrive 40i, 2019-, X5 sDrive 40i, 2020-, X5 xDrive 45e, 2021-)
- Removing the exhaust turbocharger (cylinder head removed)
- Mounting the cylinder head on the assembly jig
- Adjusting the eccentric shaft to the minimum lift (cylinder head removed)
- Removing the torsion springs (cylinder head removed)
- Removing all gates
- Removing all intermediate levers
- Removing the intake camshaft (cylinder head removed)
- Remove the servomotor for the eccentric shaft (cylinder head removed)
- Removing the eccentric shaft (cylinder head removed)
- Removing the exhaust camshaft (cylinder head removed)
- Remove all roller cam followers
- Removing all hydraulic valve clearance compensating elements
- Remove all valve springs
- Remove valve stem seals
- Remove all valves
- Install all valves
- Installing valve stem seals
- Install all valve springs
- Installing all hydraulic valve clearance compensating elements
- Install all roller cam followers
- Install exhaust camshaft (cylinder head removed)
- Installing the eccentric shaft (cylinder head removed)
- Installing the servomotor for the eccentric shaft (cylinder head removed)
- Installing the intake camshaft (cylinder head removed)
- Checking the intermediate lever classification
- Installing all intermediate levers
- Installing all gates
- Checking the position of the intake camshaft (cylinder head removed)
- Install the torsion springs (cylinder head removed)
- Removing the cylinder head from the assembly jig
- Installing the exhaust turbocharger (cylinder head removed)
- 11 12 729 Checking cylinder head for watertightness (Cylinder head disassembled) (X5 xDrive 40i, 2019-, X5 sDrive 40i, 2020-, X5 xDrive 45e, 2021-)
- 11 12 005 Removing and installing/sealing the left cylinder head cover (X5 xDrive 50i, 2019)
- 11 12 006 Removing and installing/sealing right cylinder head cover (X5 xDrive 50i, 2019)
- 11 12 070 Remove and install/replace acoustic cover (X5 xDrive 50i, 2019)
- 11 12 105 Removing and installing the left cylinder head (X5 xDrive 50i, 2019)
- 11 12 106 Removing and installing right cylinder head (X5 xDrive 50i, 2019)
- 11 12 165 Replacing cylinder head at left (X5 xDrive 50i, 2019)
- 11 12 166 Replacing right cylinder head (X5 xDrive 50i, 2019)
- 11 12 729 Checking cylinder head for watertightness (Cylinder head disassembled) (X5 xDrive 50i, 2019, X5 M50i, 2020-)