Replacing oil sump: remount the oil-level sensor

NOTE: RISK OF DAMAGE 
Electrostatic discharge  .
Damage to or destruction of electrical components  .

• Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
• Read and comply with user information on using the associated special tool 12 7 060.
• Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
• Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
• For additional information see: NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

• Unscrew the nut (arrows).
• Feed out and remove the oil-level sensor (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace O-ring (1).

  Parts:  O-ring

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert and install the oil-level sensor (1).
• Tighten the nuts (arrows).

TIGHTENING TORQUE SPECIFICATIONS

Oil level sensor to oil sump
M6 hexagon nut	Joining torque	2 Nm
	Tightening torque	8.5 Nm

Courtesy of BMW OF NORTH AMERICA, INC.