Replacing the cylinder head (remounting components)

• Release the venting connector (1) at the cylinder head (3).
• Release the coolant temperature sensor (2) at the cylinder head (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace the cylinder head (3).

  Parts:  Cylinder head

• Tighten venting connector (1) on cylinder head (3).

TIGHTENING TORQUE SPECIFICATIONS

Venting connector/special tool to cylinder head
M10	Tightening torque  18 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the coolant temperature sensor (2) on the cylinder head (3).

TIGHTENING TORQUE SPECIFICATIONS

Coolant temperature sensor at cylinder head
Sensor	Tightening torque  18 Nm