17 00 COOLING, TEST (X5 xDrive 40i, X5 sDrive 40i, X5 xDrive 45e 2019-)
17 00 TECHNICAL DATA OVERVIEW
| Coolant level | ||
| Overfill quantity of coolant (above the maximum mark) In the high-temperature expansion tank | + 200 ml | |
| Overfill quantity of coolant (above the maximum mark) In the low-temperature expansion tank (If Installed) | + 100 ml | |
| Cooling system test pressure | ||
| Test pressure for cooling system (gauge pressure) | 1.5 bar | |
| Filling capacity of high-temperature coolant circuit G05/G06/G07/G18 | ||
| B58B30M1 | 12.6 l | |
| B58B30M1 (OE823) | 13.6 l | |
| Filling capacity of low-temperature coolant circuit G05/G06/G07/G18 | ||
| B58B30M1 | 5.4 l | |
| Opening pressure of coolant seal cover | ||
| Pressure relief valve opens when the pressure exceeds the ambient pressure. | min. 1.4 bar | |
| Electric changeover valve must open at latest when the pressure is lower than the ambient pressure | max. 0.1 bar | |
| Test conditions for coolant level | ||
| Coolant must be cooled down | ||