When replacing the left-hand exhaust turbocharger: Remount components

Unscrew the banjo bolt (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Feed out and remove the coolant pipe (1) from the pin (arrowed).

Courtesy of BMW OF NORTH AMERICA, INC.
Unscrew the banjo bolt (1).
Loosen screw (2).
Remove the coolant pipe (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Replace the banjo bolt.
Parts: Hollow bolt
Replace seals (1).
Parts: Seals

Courtesy of BMW OF NORTH AMERICA, INC.
Replace the right exhaust turbocharger.
Parts: Right exhaust turbocharger
Position the coolant pipe (3).
Position the banjo bolt (1) and screw in several threads.
Hand-tighten the bolt (2).

Tighten the banjo bolt (1).

TIGHTENING TORQUE SPECIFICATIONS

Banjo bolt for coolant pipe to exhaust turbocharger
Hollow bolt Replace the banjo bolt.	Joining torque 8 Nm Angle of rotation 60°

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screw (2).

TIGHTENING TORQUE SPECIFICATIONS

Coolant line to exhaust turbocharger
M6x16	tightening torque 10 Nm

Replace the banjo bolt.
Parts: Hollow bolt
Replace seals (1).
Parts: Seals

Courtesy of BMW OF NORTH AMERICA, INC.
Feed in and position the coolant pipe (1) on the pin (arrowed).

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten the banjo bolt (1).

TIGHTENING TORQUE SPECIFICATIONS

Banjo bolt for coolant pipe to exhaust turbocharger
Hollow bolt Replace the banjo bolt.	Joining torque 8 Nm Angle of rotation 60°

Courtesy of BMW OF NORTH AMERICA, INC.