Installing the rain-light-solar-condensation sensor

• Feed in the rain-light-solar-condensation sensor (1) in arrow direction into the holder (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Centrally press on the rain-light-solar-condensation sensor (2) onto the retaining spring (3).
• Successively press down the retaining springs (4) on each side to lock it.
• Connect plug (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Check if air pockets are visible.

  Visible shades (1) and (2) are not air pockets but rather the optical element of the sensor. The shades do not represent any functional limitation.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE INTERIOR REARVIEW MIRROR .
• Refer to INSTALLING THE COVERS FOR THE INTERIOR MIRROR .