Removing the cover on the inside of the window frame at the rear
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING REAR DOOR TRIM .
Prerequisite
Side window glass is open.
- Open side window.
- Lever out cover (1) from clips (2).
- Start at the front and remove the cover (1) from the door frame towards the bottom inside.
- Only for G07 with SA sun protection:
- Lever out cover (1) from the clip (2).
- Remove the cover (1) from the door frame towards the bottom inside.
- Unclip the cover (1) outwards from the door frame and remove.
- Open side window.
- Lever out cover (1) from the clip (2).
- Remove the cover (1) from the door frame towards the bottom inside.