51 11 Bumper, Front
BUMPER, FRONT - 5111 TIGHTENING TORQUE OVERVIEW
| Bottom support on front axle support adapter | ||
| M8x70 screw | Tightening torque | 19 Nm |
| Cross-member on crash reinforcement | ||
| Screw | tightening torque | 19 Nm |
| Front bumper bracket to engine mount | ||
| Hexagon screw with flange | Joining torque | 100 Nm |
| Angle of rotation | 180° | |
| Front bumper cover on side wall | ||
| Hexagon screw | Tightening torque | 3 Nm |
| Front fog lamp holder to bumper panel | ||
| screw | Tightening torque | 3 Nm |
| License plate baseplate | ||
| Screw TS 5x16 | Tightening torque | 0.7 Nm |
| Upper bumper cover on air flap control | ||
| screw | Tightening torque | 3 Nm |
| Vertical connection to support for bumper cover | ||
| M6x20 screw | Tightening torque | 11.8 Nm |