Install the rear luggage compartment floor covering

Position luggage compartment floor covering (2) correctly and lock on the handle (3).

Tighten the screws and close the covers (1).

TIGHTENING TORQUE SPECIFICATIONS

Luggage compartment floor covering on holder
Oval-head screw	Tightening torque	15 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Lift the luggage compartment floor covering.
Slide the clamp (1) back from the removal position (2) again.
Insert the gas pressure spring (3) onto the ball head and lock.

Courtesy of BMW OF NORTH AMERICA, INC.