Removing the rear flashing beacon
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING WINDOW FRAME TRIM OF REAR DOOR .
- Refer to REMOVING THE TRIM FOR THE SIDE REAR WINDOW FRAME .
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Loosen screws (1).
- Disconnect the plug connection (2) and feed out the cable.
- Disassemble the flashing beacon (3) from the holder and remove it.