Installing the oil pressure switch

• Guide in and install oil pressure switch (1).
• Tighten the oil pressure switch (1) with the special tool 0 496 106 (11 8 720) .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Oil pressure switch to crankcase
  M12X1.5	tightening torque  16.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1) and lock.

The connector (1) must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING UNDERBODY PROTECTION AT REAR .
• Refer to INSTALLING THE STIFFENING PLATE .
• Refer to CHECKING ENGINE OIL LEVEL .