Installing the connecting plate
- Install the connecting plate (1).
- Tighten the screws (2).
TIGHTENING TORQUES SPECIFICATION
| Connecting plate of charge air cooler | ||
| tightening torque | 6.5 Nm | |
- Position the coolant line (1) on the centering bearing (3).
- Tighten nut (2).
TIGHTENING TORQUES SPECIFICATION
| Connecting plate of charge air cooler | ||
| Nut M6 | tightening torque | 8 Nm |
- Position the coolant ventilation line (2) in the holder (1).
- Lock holder (1).