Install the rear section of the front wheel arch cover
NOTE:
To provide a better overview: Schematic diagram with partially hidden components.
- Feed in the rear section of the wheel arch cover (1).
- Tighten screws (arrows).TIGHTENING TORQUES SPECIFICATION
Wheel arch cover Thermoplastic hexagon screw Tightening torque 2.6 Nm Plastic nut Tightening torque 2.6 Nm
Follow-up work
- Refer to MOUNTING THE WHEEL .
- Refer to PARTIALLY INSTALLING THE FRONT WHEEL ARCH TRIM (DOOR SILL) .