Install right luggage compartment wheel arch trim panel (all equipment versions)

NOTE: Description is for left component only. Procedure on the right side is identical.

Installing the luggage compartment wheel arch trim panel on left (all equipment versions)

Installing left luggage compartment wheel arch trim panel (without 3rd row seats)

Release the cover (1) from the rear at the detents (2) and remove it.

Courtesy of BMW OF NORTH AMERICA, INC.
Version A:
Feed in the luggage compartment wheel arch trim panel (2) at the trunk lid lock. Hook the Bowden cable (1) in on the luggage compartment wheel arch trim panel (2).
Connect and lock the present connectors.

Courtesy of BMW OF NORTH AMERICA, INC.
Version B:
Feed in the luggage compartment wheel arch trim panel (2) at the trunk lid lock. Hook the Bowden cable (1) in on the luggage compartment wheel arch trim panel (2).
Connect and lock the present connectors.

Courtesy of BMW OF NORTH AMERICA, INC.
Correctly position the luggage compartment wheel arch trim panel (3).
Make sure the luggage compartment wheel arch trim panel (3) is seated correctly on the tailgate seal.
Clip in the luggage compartment wheel arch trim panel (3) at the clip in the upper area.
Install the expanding rivet (1).

Tighten the screw and mount the cover (2).

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUES SPECIFICATION

Luggage compartment wheel arch trim panel on body
screw	Tightening torque	3.0 Nm

Variant without electrical roller cover for luggage compartment:
Install the expanding rivet (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Check whether the detents (1) and guides (2) are present and have damage; if necessary replace the cover.

Courtesy of BMW OF NORTH AMERICA, INC.
Install and lock the cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work